manualshive.com logo in svg

OTARI RADAR II, Operation Manual, Page: 197 / 261

Share
Download
OTARI RADAR II Operation Manual Download Page 197

8.3.2  Backup Procedure

1.

Press MENU/PREV.  

Scroll using the UP/DOWN buttons or press P on

the QWERTY keyboard to proceed to the PROJECT submenu.

2.

Press ENTER.  

3.

Press ENTER once more to enter the BACKUP dialog. 

The LCD will

present the first backup option (detailed information about these options
appears in the following paragraphs):

4.

Use the Cursor up/down keys to select the desired Backup operation,
then press ENTER.    

The LCD will present the default backup name

indicating the time and date of the backup. (You may edit this name using
the QWERTY buttons on the Session Controller.)

5.

Press ENTER to accept the name and proceed with the backup
operation. 

Backup will begin and the system will lock out any further key

presses. The LCD will show the time remaining until the procedure is
finished. 

Upon completing the backup, the tape will be ejected and the LCD will
display a BACKUP COMPLETE message.

6.

Remove the 8mm tape,

carefully label it, and store it in a cool, dry place.

Edition 1

8-6

S E C T I O N   8

Summary of Contents for RADAR II






































































































































































































































































Reviews:

No comments