OTARI RADAR II Operation Manual Download Page 155

Page: 155 / 261

6.10.4 Project Functions

These keys provide quick access to the Project menu items of the same name(s).

These features are described in Section 4, §4.4.

6.10.5 Edit Locators

TBD

6.10.6 RADARVIEW Zoom Keys

RADARVIEW

is a graphical display interface for keeping track of edits, track

meter values, sync settings, edit parameters, etc.

RADARVIEW

is described fully

in §2.12.

The Zoom Keys access the

RADARVIEW

Track Window Zoom. The track

window provides 14 zoom levels, allowing the screen to zoom from a bit over 4
seconds out to a 24-hour day.

6.10.7 RADARLINK Function Keys

These keys provide keyboard access to the RADARLink functions available on the
Projects menu (Section 4, §4.4).

Edition 1

6-12

S E C T I O N 6

Summary of Contents for RADAR II






































































































































































































































































Search results

Summary of Contents for RADAR II

Reviews:

OTARI RADAR II, Operation Manual, Page: 155 / 261

Search results

Summary of Contents for RADAR II

Reviews: