OTARI RADAR II, Operation Manual, Page: 243 / 261

Configure Debug Procedure
1. Select the Configure Debug item from the Diagnostics menu. The
system will respond with these default values:
2. Use the cursor left/right keys to move between these four items; use
cursor up and down to make choices to see System information, SCSI
information, and/or Sync information.
The buffer size (BUF:030)
describes the amount of space devoted to a “capture” buffer for message and
error logging.
Please Note: SYSTEM is an overall configuration value - If this is set to N, no debug
messages of any kind will be logged. If set to Y, messages are logged. The
SCSI and SYNC debug messages are only logged if SYSTEM is set to Y.
B.2.8.2 Show Debug (Messages on LCD)
As RADAR operates, it records its various internal status messages into the buffer
described above. The Show Debug item allows you to view the contents of this
buffer - text messages describing RADAR’s recent activity - without requiring an
external DEBUG monitor setup. If your system is not functioning properly,. check
these messages, and record them for Otari technical support.
Show DEBUG operation
1. Select SHOW DEBUG from the Diagnostics menu. The system
responds with the two most recent internal text messages:
2. RADAR’s LCD display only provides two lines of 16 characters each;
however the messages are of variable length.
Use the cursor left/right keys
to move horizontally to read the messages in their entirety, and use
cursor up/down to move vertically through the list, as shown:
Edition 3
B-16 A P P E N D I X B