OTARI RADAR II, Operation Manual, Page: 168 / 261

Please Note: RADAR II uses single-track digital crossfade to minimize or eliminate the
“click” or “pop” when rejoining dissimilar audio levels. The crossfade length
defaults to 5 milliseconds - normally a quite sufficient length. However, the
crossfade length is adjustable - refer to §7.11, Modify Edit, for further
information.
CUT Procedure
1. Define the start point of the clip you want to CUT by locating to the
beginning of the clip with either the Jog Wheel, Transport or ENTER
TIME functions, then press MARK IN.
2. Define the ending point of the clip you want to CUT by locating to the
end of the clip in the same manner, then press MARK OUT.
3 . From the Session Controller: Press the CUT button (from the
Editing keys). The system will respond as shown below.
Edition 1
7-8 S E C T I O N 7