OTARI RADAR II, Operation Manual, Page: 252 / 261

Please Note: If the Master and Slave unit(s) do not all have the modified MF3 board
(described above), then
RADARLINK
will not be able to establish
communications. Contact Otari Technical Support!
D.2.2 Software Versions...
ALL units in a
RADARLINK
ed configuration MUST be running the same
version of system software! If any units need to be upgraded, you will be prompted
and
RADARLINK
will not be established.
D.3 RADARLINK ENABLE/DISABLE
(RE-8: “L”)
Please Note: The
RADARLINK
setup items are available on the SYSTEM menu.
RADARLINK
is selected by pressing the LINK button (“L” on the RE-8
keyboard, or by selecting the RADARLINK ENABLE? menu item from the System
menu. The RADAR unit on which this selection is made is configured as the
MASTER; this may be any unit in the system. The MASTER unit is assigned an
ID of “M”, and this is displayed at the upper-right corner of the LCD window.
The RADARLINK enable/disable menu item is provided to enable
RADARLINK
operation, permitting multiple slaved RADAR systems to be controlled from one
location. (The “L” key on the RE-8 also access this function.) Upon selecting this
function, the menu will prompt you with:
If you select YES, the system will prompt you with:
A unique ID number is then assigned automatically to the other systems in the
RADARLINK
chain. In rare circumstances, a duplicate ID number will be
assigned. If this occurs, that system will display a message:
DUPLICATE ID
SELECT NEW ID:
R A D A R L I N K F E A T U R E S D-3
Edition 3