OTARI RADAR II, Operation Manual, Page: 84 / 261

2. Use the Cursor Up/Down keys (or the Jog wheel) to select the desired
format (“AES/EBU, S/PDIF” or “TDIFLINK”), then press ENTER.
(If
you selected “AES/EBU, S/PDIF”, the system responds with:)
3. Select the desired input (and output) tracks. Use the Cursor Left/Right
buttons and the Up/Down buttons to make your selection(s).
Remember that the tracks must be from the same 8-track disk drive block
(although they need not be adjacent to each other.) Also, specifying Track
00 means the channel will be inactive.
Enabling Digital I/O Operation
1. To enable Digital I/O operation, press the OFFSET/SYNC button. The
system will respond with the Sync Source dialog box, below. Use the cursor
buttons (or jog wheel) to select Sync Source: Digital:
2. Press ENTER. The system responds with a format query:
3. Select the desired digital I/O format (AES/EBU, S/PDIF, or TDIFLINK),
then press ENTER.
The External Sync button(s) will flash to indicate that
Digital I/O is now active.
Start the digital input source (if selected), or press PLAY to enable the digital
output.
If digital input is active, you will see levels activity on the digital input
channel(s) you selected.
Please Note: TDIFLink setup/operation appears in Appendix C.
Edition 1
3-28 S E C T I O N 3