OTARI RADAR II, Operation Manual, Page: 64 / 261

3.5.2 Changing RADAR II's Sample Rate
1. Press the MENU/PREV button.
2. Scroll UP/DOWN through the choices until the PROJECT menu item is
displayed.
3. Press ENTER.
4. Scroll through the submenus until the Sample Rate item is displayed:
5.. Press ENTER. The system will respond with:
6. Use the cursor up/down keys (or the Jog wheel) to select the desired
Sample Rate for the project,.
The available rates are 32, 44.1, 44.056,
47.952, and 48 kHz.
7. When you have selected the desired sample rate, press ENTER. This will
automatically accept the selection and escape from the menu.
Please Note: Sample Rate setting is retained by the current project, and will be recalled
on the next power up. Other projects may have different sample rates;
however once a project has been created, its sample rate is retained.
Edition 1
3-8 S E C T I O N 3