OTARI RADAR II, Operation Manual, Page: 178 / 261

Track Selection
6. Press Enter. The system will respond with:
7. To move the material to the same tracks, cursor to SAME then press
Enter. To move that material to other tracks, cursor to Other then
press ENTER..
If you select Other, the system prompts you to select
tracks:
Select the desired track(s), then press Enter to continue.
Please Note: If your clip originates from multiple tracks, you may select any other tracks as
destinations; however a multiple track MOVE always ends up in the
numerical order from which it came. Also, a MOVE across 8-track drive
boundaries uses disk space on the destination drive(s). For further
information, refer to “IMPORTANT PASTE NOTES” in §7.6.
8. The LCD asks if you want to Insert or Overwrite at the MOVE TO
location:
Press ENTER if you wish to accept the Insert default. If you want the
clip to overwrite at the new location, cursor to Overwrite, then press
ENTER.
Refer to the following diagram for RADAR II’s action:
Edition 1
7-18 S E C T I O N 7