OTARI RADAR II, Operation Manual, Page: 188 / 261

7.15 IMPORT *.WAV TRANSLATOR FEATURE
RADAR II includes a built-in translator for WAV-format sound files. These files are
commonly used with PC-based sound hardware, samplers and workstations. The
entry point for these files is RADAR II’s floppy disk drive; file(s) read from floppy
disk are translated, then posted to RADAR II’s Clipboard for use.
IMPORT Procedure
1. Insert a DOS-formatted floppy disk drive containing the file(s) to be
imported into RADAR II’s floppy disk drive.
2. Press MENU/PREV, select the EDIT menu, then press ENTER.
3. Scroll down the menu to select the IMPORT *.WAV item:
4. Press ENTER. The system will respond with:
then finally:
5. Use the cursor up/down arrows (or Jog wheel) to select the desired file,
then press ENTER to continue.
The system will respond with
information about the sound file including MONO or STEREO, encoding
method, Sampling Rate, and gain (in percent):
6. You may specify the desired SAMPLE RATE (range: 8 to 50 kHz) , and
Gain (range: 0 to 999%) for the imported file. (Use Cursor left/right to
move between fields.) When the Sample Rate and Gain fields are set as
desired, press ENTER to write the sound file to RADAR II’s clipboard.
Edition 1
7-28 S E C T I O N 7