OTARI RADAR II, Operation Manual, Page: 239 / 261

INIT DISK Procedure
1. Unmount RADAR’s Operating System (described in §B.2.2), if you
have not already done so.
2. From the Diagnostics menu, select “CHECK DISK” item. The system
will respond with:
3. Use the cursor up/down keys (or the Jog wheel) to select the desired
disk to check, then press ENTER.
The system will respond with:
4. Press ENTER to continue (or select NO to abort.) The system processes
for a moment, then responds with a confirmation:
CAUTION: If you proceed with this operation, all audio and project data will be erased
from the disk. You will then need to re-install RADAR’s operating software
from floppy disk.
5. To abort the operation, select NO, then press ENTER. To proceed,
select YES, then press ENTER.
The system responds with:
and then finally,
Edition 3
B-12 A P P E N D I X B