OTARI RADAR II, Operation Manual, Page: 175 / 261

7.7 ERASE
The ERASE function deletes audio from the selected track(s), without changing
their length(s).
To do an ERASE, you select the track(s), and the beginning and end points of the
section; the ERASEd clip is not placed on the Clipboard
(but it can be restored using
the UNDO function).
ERASE Procedure
1. Define the start point of the clip you want to ERASE by locating to the
beginning of the clip with either the Jog Wheel, Transport or ENTER
TIME functions. Press MARK IN.
2. Define the ending point of the clip you want to ERASE in the same
manner, then press MARK OUT.
3. Press the ERASE button.
4. The LCD will ask you to select which track(s) to ERASE:
R A D A R I I E D I T I N G F E A T U R E S 7-15
Edition 1