Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 131 / 392

Note: Pressing the ± (format) key while dBm is highlighted
changes the frequency band to be adjusted: L1 > L2 > L5 >
ALL.
Contrary to option 2. , this will only adjust power for the selected satellites
in view
,
not for new satellites coming into view later.
Note: If a value is not accepted, it is likely out of spec, see "Transmit Power"
on page 86 .
4.4 Accessing the GSG Web Interface
To connect to the "The GSG Web UI" on page 176 , follow these steps:
1.
Determine the IP address of the GSG unit you want to connect to, by navigating to
Options > Interface and Reference . The IP address will be listed under the Net-
work menu item.
2.
Open a Web browser (such as Mozilla Firefox or Internet Explorer), and enter the IP
address into the address bar.
3.
Once connected, the browser will display a graphical representation of the front
panel of your GSG unit. You can click the buttons to perform operations as you
would if you were physically doing so from the front panel of the unit. The func-
tionality of the buttons and options is detailed in the Section
"Front Panel" on
page 28 . The only exception is the Power button, which restarts the unit (instead of
powering it OFF).
The Primary Navigation Menu on top of the Web UI provides access to the following
menu items:
GSG FILES : Provides access to all scenario configuration files and log files of
your GSG unit. The files can be viewed and downloaded with a Web browser.
To upload a file, click Choose Files to browse directories, e.g., on a
connected PC. Multiple files can be uploaded at one time, provided that
4.4 Accessing the GSG Web Interface
User Manual GSG-5/6 Series Rev. 27 115