Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 262 / 392

Note
Setting not stored during scenario or 1-channel mode execution.
The actual C/N
0
of individual signals may be lower than this setting due to various reasons
(distance, elevation, modified by event, etc).
Parameter
C/N
0
in dB·Hz. A decimal number, within the range [0.0 … 56.0].
Example
SEND:
SOURce:NOISE:CNO 44.1
6.3.3.18 SOURce:NOISE:CNO?
Function
Get the current maximum carrier-to-noise density of the simulated signals.
Command Syntax
SOURce:NOISE:CNO?
Example
SEND:
SOURce:NOISE:CNO?
READ:
39.2
6.3.3.19 SOURce:NOISE:BW
Function
Set the noise simulation bandwidth. This command is only available with GSG-55 units.
246 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference