Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 252 / 392

6.3.2.2 SYSTem:RESET:FACTory
Function
This SYSTem command performs the factory reset. With parameter restore it only
restores the factory default files. With parameter clean it cleans all user data and restores
factory default files.
Command Syntax
SYSTem:RESET:FACTory <restore|clean>
Note
Communication interface is not reset in order to maintain connection to the unit.
Parameter
enum = {restore, clean}
Example
SEND:
SYSTem:RESET:FACTory clean
6.3.3 SOURce: Subsystem Commands
Commands are available at all times, but note that some commands behave differently
depending on the status of the unit. More specifically, commands related to, e.g., power set-
tings will have an immediate effect, but if these commands are called during scenario or sig-
nal execution, the original settings will be restored when the execution stops.
In general, to permanently store settings the commands should be called when execution
is not running.
6.3.3.1 SOURce:POWer
Function
Sets the transmit power of the device. During scenario execution all signals on all bands will
get the new transmit power, and all possible power offsets between different satellite con-
stellations and frequency bands are discarded.
236 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference