Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 46 / 392

3.1.1.8 Arrows
Press any of the arrow keys to navigate in displays.
When editing an integer value, press the UP/DOWN arrows to incrementally
increase or decrease the value.
3.1.1.9 N/S
When editing latitude , press N/S to toggle between north and south latitude.
During scenario execution, press N/S to open the transmit power menu , in order
to adjust the scenario's noise settings.
3.1.1.10 E/W
When editing longitude , press E/W to toggle between east and west longitude.
During scenario execution, press E/W to adjust the units displayed for Altitude and
Speed ( m / m/s > ft / kn > ft / mph ).
3.1.1.11 Numeric Keys
Press the numeric keys to input numbers.
3.1.1.12 +/– (format)
When editing numbers, press +/– (format) to toggle between the positive and
negative value.
When configuring or executing a scenario, press +/– (format) to change the
coordinate format between geodetic coordinates, and
ECEF
format.
In scenario execution, View 2/5 and higher, press +/– (format) to switch
between frequency bands (L1, L2 and L5).
3.1.1.13 [.] (hold)
Use the "DOT" [.] (hold) key together with numeric keys , where appropriate.
During scenario execution, press the [.] (hold) key to hold/resume the simulated
movement (trajectory) .
While a scenario is loading, press the [.] (hold) key to initiate a scenario arming
from the front panel.
30 User Manual GSG-5/6 Series Rev. 27
3.1 Front Panel