Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 160 / 392

1.
Open the RSG Trajectory editor.
2. Enter a Start position and altitude (m), or leave the default.
3. Add VELOCITY with initial speed and heading.
4.
Next, add a KEEP GOING instruction in order to assign a duration to the previous
command. This command will be shown with a gray background because it serves as
a filler command that is not written into the trajectory file. It is used only to display
the trajectory on the map, and to properly time out an action. Select a duration for
the
KEEP GOING filler command e.g., 5 minutes.
Note: With some of the other commands, the KEEP GOING com-
mand is created by StudioView (you may still need to assign a dur-
ation manually).
5.
Next, create a turn e.g., by 180° within 5 minutes: While this can be accomplished
with the command sequence
RATEHEADING , KEEP GOING , STOP , this would
require some calculation to determine that the course rate change for this turn is -
0.6°/s. Instead, use the
Maneuver command Turn , and define the Direction change,
or the radius of the turn:
144 User Manual GSG-5/6 Series Rev. 27
4.9 Studioview Tasks