Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 49 / 392

ARM : the unit is waiting for a trigger to start the scenario
HOLD : the movement along the trajectory is paused
3.4 "Start" Menu
To start the currently loaded scenario (as previously selected using the ""Select" Menu" on
page 38 ), highlight the main menu option Start by pressing the arrow keys. Then press
enter .
In its default mode, the GSG simulator will launch the scenario (the delay depends on the
size/complexity of the scenario data), and then automatically run the scenario.
To stop the scenario, press exit or cancel , and confirm.
There are, however, interesting alternatives to starting a scenario, mainly to facilitate test
automation. The illustration below summarizes the start variations discussed underneath.
Figure 3-4:
Scenario start variations – Flowchart
3.4.1 Scenario Start Variations
Hold before manual start
Once you pressed start , or enter (with the Start main menu option highlighted), the GSG
unit requires some time to launch the scenario (the delay depends on the size/complexity
3.4 "Start" Menu
User Manual GSG-5/6 Series Rev. 27 33