Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 129 / 392

Open the , and then the command line interpreter (CLI) by clicking the MONITOR
icon:
Ensure that the CLI is connected to your GSG unit (see "Using the CLI" on
page 116 ).
Enter the following command:
write SOURce:KEYLOCK:PASSWord [wxyz]
The keyboard lock code
[wxyz]
can be changed at any time. The user-issued lock
code must be 4-8 digits in length, and contain only numerical characters. The default
keyboard lock code is "
1122
".
4.3 Setting Transmit Power
There are three different ways to alter the Transmit Power (also referred to as signal
level):
1.
While configuring a scenario:
a.
in Studioview e.g., by using the Events editor, or
b.
via the GSG menu Options > Transmit Power :
Navigate to the Transmit Power menu, then press the RIGHT arrow
key to highlight the current value, then the UP/DOWN arrows or the
4.3 Setting Transmit Power
User Manual GSG-5/6 Series Rev. 27 113