Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 120 / 392

To access this view, navigate to Options > Reset to factory defaults :
Figure 3-40:
Restore factory defaults
Clean&Restore will restore the original pre-defined scen-
ario/trajectory/event/navigation data files , and delete all user cre-
ated/uploaded files and execution log . Please wait for this operation to
complete. When prompted that the operation is complete, press “OK”. Wait until
this operation is complete before power cycling the GSG unit.
Restore will only restore data files to their defaults – all user data on the unit will
remain stored (unless they have same file names as the factory data, which is not
recommended).
Cancel will do nothing, and return to the Options menu.
3.6.7 Calibration
Note: This chapter describes the Calibration menu items. Calibration itself
should only be attempted by qualified technicians. Alternatively, you can
send your GSG unit to Orolia to be calibrated.
Via the Calibration view, you can:
calibrate the unit’s maximum output power, and OXCO frequency
view the results of a previous user calibration.
To access the Calibration view, navigate to Options > Calibration :
Figure 3-41:
Calibration view
The Calibration view displays when the Factory calibration was done, and if and when
the last User calibration was done.
104 User Manual GSG-5/6 Series Rev. 27
3.6 "Options" Menu