Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 114 / 392

Figure 3-30:
Signal Generator running
All signal parameters are stored to non-volatile memory and are set when the unit is star-
ted.
3.6.3 Interface and Reference
GSG interface options can be configured via the Options > Interface and Reference
view:
Figure 3-31:
Interface/Reference Configuration
Depending on the type of interface chosen, only relevant fields are editable.
The remote interface type can be:
USB
Ethernet
GPIB : Set the address here.
SCPI-Raw network clients can use a socket connection to port 5025 and send/re-
ceive SCPI commands terminated by a newline.
The 10 MHz input can also be selected via this view. When it is selected, a small symbol con-
taining the text EXTREF is displayed in the upper right corner of the GSG display.
In all models except GSG-52 and GSG-53, the PPS output on the rear panel can be con-
figured to send 1, 10, 100 or 1,000 pulses per second. The pulse ratio is always 1/10 (1/10
high, 9/10 low).
PPS Out is active on the rising edge of the signal.
98 User Manual GSG-5/6 Series Rev. 27
3.6 "Options" Menu