Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 300 / 392

If the freqband parameter is omitted, the L1 power is returned.
Command Syntax
SOURce:SCENario:POWer[n]? [<freqband>]
Note
Only available during scenario execution.
Parameter
FreqBand [L1, L2, L5, ALL]
Example
SOUR:SCEN:POWer3?
Returns power of channel #3
Example return value: 123.4, -119.7
SOUR:SCEN:POWer2? L5
Returns L5 power of channel #2
Example return value: 123.4, -119.7
6.3.3.60 SOURce:SCENario:POWer
Function
Set the power of satellite satID when scenario is running. Freqband parameter is optional
and can be used when only certain frequency band power of satellite is changed. Value
ALL in freqband means that power of all bands are adjusted by the amount indicated by
the command.
Command Syntax
SOURce:SCENario:POWer ON|OFF
SOURce:SCENario:POWer <satID>,<decimal>[,<freqband>]
SOURce:SCENario:POWer <satID>, ON|OFF
SOURce:SCENario:POWer <SatSystem>, ON|OFF
284 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference