Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 268 / 392

signal mode used when the signal generator was started. For example, if the signal gen-
erator is started in PRN mode it is possible to switch to unmodulated mode and back to
PRN mode, but not to modulated mode. If started in modulated mode it is possible to
switch between all three signal modes. The signal mode cannot be changed if the signal
generator started in unmodulated mode.
Examples (used when the unit is not generating RF)
Set modulated GPS signal with id11:
SEND:
SOURce:ONECHN:SATid G11
Set unmodulated GLONASS signal with frequency slot -5:
SEND:
SOURce:ONECHN:SATid UR-5
Examples (used while the unit is generating RF, e.g. executing a scen-
ario)
Set signal mode to unmodulated mode:
SEND:
SOURce:ONECHN:SATid U
Set signal mode to PRN:
SEND:
SOURce:ONECHN:SATid P
Set signal mode to modulated mode:
SEND:
SOURce:ONECHN:SATid M
6.3.3.26 SOURce:ONECHN:SATid?
Function
Query the 1-channel mode satellite identifier. The returned satellite identifier can be:
Gxx for GPS, for example G12
Rxx for GLONASS, for example R15
252 User Manual GSG-5/6 Series Rev. 27
6.3 Command Reference