Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 222 / 392

OPT-ECL : enabling this option loads and enables the predefined scenarios for eCall.
OPT-FN : fixed bandwidth noise
OPT-GLO : enables Glonass signals supported.
OPT-GAL : enables all Galileo signals supported.
OPT-HPWR : High Power Option
OPT-HV : high velocity/altitude enables the simulation of high velocity vehicles.
OPT-INTF : interference option to simulate interference signals. See also "Interference sig-
nals" on page 64 .
OPT-IRN : enables all IRNSS signals supported.
OPT-JAM : jamming enables the ability to define a point source of interference signals. See
"Interference signals" on page 64 .
OPT-L2 : enables GPS L2P, L1P and GLONASS L2 signals.
OPT-L2C : enables GPS L2C signals.
OPT-L5 : enables GPS L5, Galileo 5a/b, BeiDou B2, IRNSS, SBAS L5 signals.
OPT-L6 : reserved for Galileo E6 and BeiDou B3.
OPT-MP : allows for the simulation of multipath signals. See also "Multipath Signals" on
page 61 .
OPT-NOW : uses downloaded Ephemeris and NTP time set to align GSG generator signals
with live sky.
OPT-PPS : PPS Output allows for configuring 1/10/100/1000 pulse-per-second output
aligned to the GPS on-time point
OPT-QZ : enables the simulation of QZSS signals.
OPT-RP : offers the ability to convert and record GPS data to a GSG scenario to replay the
actual route and satellites in view during that route, including power levels.
OPT-RSG : allows GSG to receive trajectory information in real time via SCPI commands.
OPT-RTK : RTK/DGNSS RTK Real time kinematics enables the generation and use of base
station information for RTK receivers.
OPT-SBAS : enables the simulation of satellite base augmentation systems (see "SBAS
Satellites" on page 82 ).
OPT-SEN : sensor simulator package generates various sensor type data in response to a
query via SCPI command (included with RSG option)
OPT-SPF : Spoofing range compensation
OPT-TIM : timing calibration option offers 10x improvement in the timing accuracy. See
also "Timing Calibration" on page 182 .
OPT-TLM : sets the TLM word in all messages to all 1’s
206 User Manual GSG-5/6 Series Rev. 27
5.14 GSG Series Model Variants and Options