Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 197 / 392

Scenario failed to start.
Please review scenario settings. Restart GSG-5/6.
Could not start scenario.
Restart GSG-5/6.
No scenarios available.
This message appears when there are no scenarios in the scenarios directory. Reset fact-
ory defaults to restore the default scenarios, or transfer your own scenarios from a PC
using the StudioView software.
Could not start data loading.
An unexpected problem has occurred while loading navigation data. Try scenario again. If
problem persists, then contact service.
Could not download SBAS data.
An unexpected problem has occurred while downloading and/or loading SBAS data. Try
scenario again. If problem persists, then contact service.
Problem opening trajectory file.
Please review scenario settings. Restart GSG-5/6.
Cannot save scenario configuration.
Saving of scenario settings failed. Try restarting the device and saving scenario con-
figuration again. If it still fails, then please contact service.
Available disk space too low xx% free.
Navigation/SBAS data download detected that the free storage space was too low. Please
use
Options > Manage files to free some space.
Invalid scenario field field - > modified.
After reading in scenario file it was detected that field is invalid, therefore its value has
been “capped” or set to a default valid value (for details, see
"Scenario File Format" on
page 191 .)
5.2 Messages
User Manual GSG-5/6 Series Rev. 27 181