Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 158 / 392

To open an existing RSG trajectory:
Navigate to File > Open… , or click .
To create a
new
RSG trajectory:
1. Enter a Start position , and an altitude in meters. Use a semicolon and a space as
separators:
Note that this data actually is not part of the trajectory, it is used only to assign a rel-
ative location to the trajectory. You can later change this location, thereby moving
the entire trajectory to a different place (unless the trajectory includes geographic
or ECEF position change commands).
2.
To add a new command to the list, highlight the command after which you would
like to insert the new command by clicking it. Then click the button. The RSG
Command Editor window will appear:
142 User Manual GSG-5/6 Series Rev. 27
4.9 Studioview Tasks