Orolia GSG-5 Series, User Manual With Scpi Manual, Page: 285 / 392

sour:scen:advlog? sat
READ:
17803, SAT, 17803.0, 2014-05-09T19:56:26.000, 503803.0, G9,
13999325.9529469125, -21451840.2281696014, -7614347.5806083838,
23965993.35, -269.19, 1414.63, -0.37
6.3.3.47 SOURce:SCENario:ADVLOG:HEADer?
Function
Queries the header for the data of the specified log. This feature is effective as of firmware
version 6.7.1.
This command is intended to be used together with the command
SOURce:SCENari-
o:ADVLOG?
, and allows to get a line of comma-separated labels for fields of corresponding
log records.
Command Syntax
SOURce:SCENario:ADVLOG:HEADer? <logID>
<logID>
— Log identifier that specifies the advanced log for which to obtain the header.
Notes
The position of specific field label within the comma-separated line is the same as the pos-
ition of that field’s value within a response line of the
SOURce:SCENario:ADVLOG
com-
mand.
In order to be compatible with future versions of the unit firmware, any user-developed
software should not strictly rely on a specific order of fields in responses to the
SOURce:SCENario:ADVLOG?
and
SOURce:SCENario:ADVLOG:HEADer?
commands.
Before issuing log record requests user-developed software should:
a.
first request the log header once,
b.
then determine positions of all fields of interest based on their labels,
c.
and then refer to log record fields by their determined positions.
The order of fields is fixed within one firmware version.
When the
logID
argument is
RSG
, the following fields are available:
6.3 Command Reference
User Manual GSG-5/6 Series Rev. 27 269