3.1
Front Panel
All GSG-5/6 simulators have similar front panels. On the right side are the controls used for
managing
scenario execution
and for
display navigation
. At the bottom are the numeric
keys used to
input scenario parameters
and other configuration.
Figure 3-1:
GSG front panel
There are three
status indicators
on the front panel. When the unit is idle, all three indic-
ators are off.
scenario
will blink when a scenario is running
armed
(or:
trig
) is lit when the unit is armed, i.e. waiting for a trigger signal to start
executing a scenario
rf-out
is lit when there is signal coming out of the RF-connector on the front panel.
Note:
The N-type RF-connector is equipped with a DC block to prevent the
flow of direct current up to 7V
DC
in order to protect the GSG unit.
3.1.1
Description of Keys
3.1.1.1
Power
The
ON/OFF
key is a toggling secondary power switch. Part of the instrument is always
ON as long as power is applied, this standby condition is indicated by a red LED above the
key. This indicator is consequently not lit while the instrument is in operation.
3.1.1.2
Start
Press
start
to start the currently selected scenario.
In the
Signal Generator
menu, press
start
to start transmitting.
28
User Manual GSG-5/6 Series Rev. 27
3.1 Front Panel
Summary of Contents for GSG-5 Series
Page 2: ......
Page 4: ...Blank page II User Manual GSG 5 6 Series...
Page 42: ...BLANK PAGE 2 5 Signal Power Level Considerations 26 User Manual GSG 5 6 Series Rev 27...
Page 382: ...BLANK PAGE 6 7 Revision History SCPI Guide 366 User Manual GSG 5 6 Series Rev 27...