OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 187
GLOBAL VLAN CONFIGURATION
Configuration
VLANs
This page allows for controlling VLAN configuration on the switch.
The page is divided into a global section and a per-port configuration section.
GLOBAL VLAN CONFIGURATION
Allowed Access VLANs
This field shows the allowed Access VLANs, i.e. it only affects ports configured as Access
ports. Ports in other modes are members of the VLANs specified in the Allowed VLANs field.
By default, only VLAN 1 is enabled. More VLANs may be created by using a list syntax
where the individual elements are separated by commas. Ranges are specified with a dash
separating the lower and upper bound.
The following example will create VLANs 1, 10, 11, 12, 13, 200, and 300:
1,10-
13,200,300
. Spaces are allowed in between the delimiters.
Ethertype for Custom S-ports
This field specifies the ethertype/TPID (specified in hexadecimal) used for Custom S-ports.
The setting is in force for all ports whose Port Type is set to S-Custom-Port.
