OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 147
LLQI
Define the maximum time to wait for IGMP/MLD report memberships on a receiver port
before removing the port from multicast group membership. The value is in units of tenths of
a seconds. The range is from 0 to 31744. The default LLQI is 5 tenths or one-half second.
Interface Channel Profile
When the MVR VLAN is created, select the IPMC Profile as the channel filtering condition
for the specific MVR VLAN. Summary about the Interface Channel Profiling (of the MVR
VLAN) will be shown by clicking the view button. Profile selected for designated interface
channel is not allowed to have overlapped permit group address.
Profile Management Button
You can inspect the rules of the designated profile by using the following button:
: List the rules associated with the designated profile.
Port
The logical port for the settings.
Port Role
Configure an MVR port of the designated MVR VLAN as one of the following roles.
Inactive
: The designated port does not participate MVR operations.
Source
: Configure uplink ports that receive and send multicast data as source ports.
Subscribers cannot be directly connected to source ports.
Receiver
: Configure a port as a receiver port if it is a subscriber port and should only receive
multicast data. It does not receive data unless it becomes a member of the multicast group by
issuing IGMP/MLD messages.
Be Caution
: MVR source ports are not recommended to be overlapped with management
VLAN ports.
Select the port role by clicking the Role symbol to switch the setting.
I indicates Inactive; S indicates Source; R indicates Receiver
The default Role is Inactive.
Immediate Leave
Enable the fast leave on the port.
Buttons
: Click to add new MVR VLAN. Specify the VID and
configure the new entry. Click "Save".
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved
values.
