OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 178
ETHERNET PROTECTION SWITCHING
Configuration
EPS
The Ethernet (Linear) Protection Switch instances are configured here.
Delete
This box is used to mark an EPS for deletion in next Save operation.
EPS ID
The ID of the EPS. Click on the ID of an EPS to enter the configuration page. The range is 1-
100.
Domain
Port:
This will create a EPS in the Port Domain. 'W/P Flow' is a Port.
Architecture
Port:
This will create a 1+1 EPS.
Port:
This will create a 1:1 EPS.
W Flow
The working flow for the EPS - See 'Domain'.
P Flow
The protecting flow for the EPS - See 'Domain'.
W SF MEP
The working Signal Fail reporting MEP.
P SF MEP
The protecting Signal Fail reporting MEP.
APS MEP
The APS PDU handling MEP.
Alarm
There is an active alarm on the EPS.
