OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 123
Destination MAC Address
The Destination MAC Address can be used to calculate the destination port for the frame.
Check to enable the use of the Destination MAC Address, or uncheck to disable. By default,
Destination MAC Address is disabled.
IP Address
The IP address can be used to calculate the destination port for the frame. Check to enable the
use of the IP Address, or uncheck to disable. By default, IP Address is enabled.
TCP/UDP Port Number
The TCP/UDP port number can be used to calculate the destination port for the frame. Check
to enable the use of the TCP/UDP Port Number, or uncheck to disable. By default, TCP/UDP
Port Number is enabled.
AGGREGATION GROUP CONFIGURATION
Group ID
Indicates the group ID for the settings contained in the same row. Group ID "Normal"
indicates there is no aggregation. Only one group ID is valid per port.
Port Members
Each switch port is listed for each group ID. Select a radio button to include a port in an
aggregation, or clear the radio button to remove the port from the aggregation. By default, no
ports belong to any aggregation group. Only full duplex ports can join an aggregation and
ports must be in the same speed in each group.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved
values.