OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 194
VLAN TRANSLATION MAPPING TABLE
Configuration
VLAN Translation
VLAN Translation Mappings
This page allows you to create mappings of VLANs -> Translated VLANs and
organize these mappings into global Groups.
Group ID
The VLAN Translation mappings are organized into Groups, identified by the Group ID. This
way a port is configured to use a number of VLAN Translation mappings easily by simply
configuring it to use a given group. Then number of possible groups in a switch is equal to the
number of ports present in this switch. A port can be configured to use any of the groups, but
only one at any given time. Multiple ports can be configured to use the same group. A valid
Group ID is an integer value from 1 to 14.
Note:
By default, each port is set to use the group with Group ID equal to the port number.
For example, port #1 is by default set to use group with GID = 1.
VID
Indicates the VLAN of the mapping (i.e. 'source' VLAN). A valid VLAN ID ranges from 1 to
4095.
TVID
Indicates the VLAN ID to which VLAN ID of an ingress frame will be translated to (granted
that the mapping is enabled on the ingress port that the frame arrived at). A valid VLAN ID
ranges from 1 to 4095.
Modification Buttons
You can modify each VLAN Translation mapping in the table using the following buttons:
: Edits the mapping row.
: Deletes the mapping.
: Adds a new mapping.
Buttons
Auto-refresh
: Check this box to refresh the page automatically. Automatic refresh
occurs every 3 seconds.
: Refreshes the displayed table starting from the input fields.
: Click to remove all VLAN Translation mappings.
