Optical Systems Design OSD2512 User Manual Download Page 218

Page: 218 / 401

OPTICAL SYSTEMS DESIGN

DOC ID: 10118101

OSD2512 OPERATOR MANUAL

PAGE 218

ECE CONTROL LIST CONFIGURATION

Configuration



Ethernet Services



ECEs

This page displays the current EVC Control Entries (ECEs). The settings can also be
configured here.

ECE ID

The ECE ID identifies the ECE. Unique ECE IDs are automatically assigned to ECEs added.
The possible range is from

through

256

INGRESS MATCHING

UNI Ports

The list of User Network Interfaces for the ECE.

Tag Type

The tag type for the ECE. The possible values are:

Any

: The ECE will match both tagged and untagged frames.

Untagged

: The ECE will match untagged frames only.

C-Tagged

: The ECE will match custom tagged frames only.

S-Tagged

: The ECE will match service tagged frames only.

Tagged

: The ECE will match tagged frames only.

VID

The VLAN ID for the ECE. It only significant if tag type 'Tagged' is selected. The possible
values are:

Specific

: The range is from

through

4095

Any

: The ECE will match any VLAN ID.

PCP

The PCP value for the ECE. It only significant if tag type 'Tagged' is selected. The possible
values are:

Specific

: The ECE will match a specific PCP in the range

through

Range

: The ECE will match PCP values in the selected range

0-1

2-3

4-5

6-7

0-3

4-7

Any

: The ECE will match any PCP value.

DEI

The DEI value for the ECE. It only significant if tag type 'Tagged' is selected. The possible
values is:

Any

Summary of Contents for OSD2512


















































































































































































































































































































































































































Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands

Optical Systems Design OSD2512, User Manual

Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands