OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 40
Daylight Saving Time
This page is used to setup Daylight Saving Time Configuration.
Daylight Saving Time Configuration
Daylight Saving Time
- This is used to set the clock forward or backward according to the
configurations set below for a defined Daylight Saving Time duration. Select 'Disable' to
disable the Daylight Saving Time configuration. Select 'Recurring' and configure the Daylight
Saving Time duration to repeat the configuration every year. Select 'Non-Recurring' and
configure the Daylight Saving Time duration for single time configuration. ( Default :
Disabled )
Recurring Configurations
Start time settings
Week
- Select the starting week number.
Day
- Select the starting day.
Month
- Select the starting month.
Hours
- Select the starting hour.
Minutes
- Select the starting minute.
End time settings
Week
- Select the ending week number.
Day
- Select the ending day.
Month
- Select the ending month.
Hours
- Select the ending hour.
Minutes
- Select the ending minute.
Offset settings
Offset
- Enter the number of minutes to add during Daylight Saving Time. ( Range: 1 to 1440
)
Non Recurring Configurations
Start time settings
Month
- Select the starting month.
Date
- Select the starting date.
Year
- Select the starting year.
Hours
- Select the starting hour.
Minutes
- Select the starting minute.
End time settings
Month
- Select the ending month.
Date
- Select the ending date.
