OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 70
HTTPS Configuration
Configuration
Security
Switch
HTTPS
This page allows you to configure the HTTPS settings and maintain the current
certificate on the switch.
Mode
Indicate the HTTPS mode operation.
Possible modes are:
Enabled
: Enable HTTPS mode operation.
Disabled
: Disable HTTPS mode operation.
Automatic Redirect
Indicate the HTTPS redirect mode operation. It is only significant when "HTTPS Mode
Enabled" is selected. When the redirect mode is enabled, the HTTP connection will be
redirected to HTTPS connection automatically.
Notice that the browser may not allow the redirect operation due to the security consideration
unless the switch certificate is trusted to the browser. You need to initialize the HTTPS
connection manually for this case.
Possible modes are:
Enabled
: Enable HTTPS redirect mode operation.
Disabled
: Disable HTTPS redirect mode operation.
Certificate Maintain
The operation of certificate maintenance.
Possible operations are:
None
: No operation.
Delete
: Delete the current certificate.
Upload
: Upload a certificate PEM file. Possible methods are:
Web Browser
or
URL
.
Generate
: Generate a new self-signed RSA certificate.
Certificate Pass Phrase
Enter the pass phrase in this field if your uploading certificate is protected by a specific
passphrase.
Certificate Upload
Upload a certificate PEM file into the switch. The file should contain the certificate and
private key together. If you have two separated files for saving certificate and private key. Use
the Linux cat command to combine them into a single PEM file. For example, cat my.cert
