Optical Systems Design OSD2512 User Manual Download Page 51

Page: 51 / 401

OPTICAL SYSTEMS DESIGN

DOC ID: 10118101

OSD2512 OPERATOR MANUAL

PAGE 51

PORT CONFIGURATION

Configuration



Ports

This page displays current port configurations. Ports can also be configured here.

Port

This is the logical port number for this row.

Description

The description of the port. It is an ASCII string no longer than 256 characters.

Link

The current link state is displayed graphically. Green indicates the link is up and red that it is
down.

Current Link Speed

Provides the current link speed of the port.

Configured Link Speed

Selects any available link speed for the given switch port. Only speeds supported by the
specific port is shown. Possible speeds are:

Disabled

- Disables the switch port operation.

Auto

- Port auto negotiating speed with the link partner and selects the highest speed that is

compatible with the link partner.

10Mbps HDX

- Forces the cu port in 10Mbps half duplex mode.

10Mbps FDX

- Forces the cu port in 10Mbps full duplex mode.

100Mbps HDX

- Forces the cu port in 100Mbps half duplex mode.

100Mbps FDX

- Forces the cu port in 100Mbps full duplex mode.

1Gbps FDX

- Forces the port in 1Gbps full duplex

2.5Gbps FDX

- Forces the Serdes port in 2.5Gbps full duplex mode.

SFP_Auto_AMS

- Automatically determines the speed of the SFP. Note: There is no

Summary of Contents for OSD2512


















































































































































































































































































































































































































Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands

Optical Systems Design OSD2512, User Manual

Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands