OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 319
Tx
Access
Retransmissions
radiusAuthClientExtAccessRetransmissions
The number of RADIUS
Access-Request packets
retransmitted to the
RADIUS authentication
server.
Tx
Pending
Requests
radiusAuthClientExtPendingRequests
The number of RADIUS
Access-Request packets
destined for the server
that have not yet timed
out or received a
response. This variable is
incremented when an
Access-Request is sent
and decremented due to
receipt of an Access-
Accept, Access-Reject,
Access-Challenge,
timeout, or
retransmission.
Tx
Timeouts
radiusAuthClientExtTimeouts
The number of
authentication timeouts to
the server. After a
timeout, the client may
retry to the same server,
send to a different server,
or give up. A retry to the
same server is counted as
a retransmit as well as a
timeout. A send to a
different server is
counted as a Request as
well as a timeout.
Other Info
This section contains information about the state of the server and the latest round-trip time.
Name
RFC4668 Name
Description
IP
Address
-
IP address and UDP port for the authentication server in
question.
State
-
Shows the state of the server. It takes one of the
following values:
Disabled
: The selected server is disabled.
Not Ready
: The server is enabled, but IP
communication is not yet up and running.
Ready
: The server is enabled, IP communication is up
and running, and the RADIUS module is ready to accept
access attempts.
Dead (X seconds left)
: Access attempts were
made to this server, but it did not reply within the
configured timeout. The server has temporarily been
disabled, but will get re-enabled when the dead-time
expires. The number of seconds left before this occurs is
displayed in parentheses. This state is only reachable
