Optical Systems Design OSD2512 User Manual Download Page 395

Page: 395 / 401

OPTICAL SYSTEMS DESIGN

DOC ID: 10118101

OSD2512 OPERATOR MANUAL

PAGE 395

UPLOAD CONFIGURATION

Maintenance



Configuration



Upload

It is possible to upload a file from the web browser to all the files on the switch,
except

default-config

which is read-only.

Select the file to upload, select the destination file on the target, then click

If the destination is

running-config

, the file will be applied to the switch

configuration. This can be done in two ways:



Replace mode: The current configuration is fully replaced with the
configuration in the uploaded file.



Merge mode: The uploaded file is merged into

running-config

If the flash file system is full (i.e. contains

default-config

and 32 other files, usually

including

startup-config

), it is not possible to create new files. Instead an existing file

must be overwritten or another file must be deleted.

Summary of Contents for OSD2512


















































































































































































































































































































































































































Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands

Optical Systems Design OSD2512, User Manual

Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands