OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 387
VERIPHY CABLE DIAGNOSTICS
Diagnostics
VeriPHY
This page is used for running the VeriPHY Cable Diagnostics for 10/100 and 1G
copper ports.
Press
to run the diagnostics. This will take approximately 5 seconds. If all ports
are selected, this can take approximately 15 seconds. When completed, the page
refreshes automatically, and you can view the cable diagnostics results in the cable
status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters.
10 and 100 Mbps ports will be linked down while running VeriPHY. Therefore,
running VeriPHY on a 10 or 100 Mbps management port will cause the switch to stop
responding until VeriPHY is complete.
Port
The port where you are requesting VeriPHY Cable Diagnostics.
Cable Status
Port
:
Port number.
Pair
:
