OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 311
Dynamic ARP Inspection Table
Monitor
Security
Network
ARP Inspection
Entries in the Dynamic ARP Inspection Table are shown on this page. The Dynamic
ARP Inspection Table contains up to 256 entries, and is sorted first by port, then by
VLAN ID, then by MAC address, and then by IP address. All dynamic entries are
learning from DHCP Snooping.
NAVIGATING THE ARP INSPECTION TABLE
Each page shows up to 99 entries from the Dynamic ARP Inspection table, default
being 20, selected through the "entries per page" input field. When first visited, the
web page will show the first 20 entries from the beginning of the Dynamic ARP
Inspection Table.
The "Start from port address", "VLAN", "MAC address" and "IP address" input fields
allow the user to select the starting point in the Dynamic ARP Inspection Table.
Clicking the
button will update the displayed table starting from that or the
closest next Dynamic ARP Inspection Table match. In addition, the two input fields
will - upon a
button click - assume the value of the first displayed entry,
allowing for continuous refresh with the same start address.
The
will use the last entry of the currently displayed table as a basis for the next
lookup. When the end is reached the text "No more entries" is shown in the displayed
table. Use the
button to start over.
ARP INSPECTION TABLE COLUMNS
Port
Switch Port Number for which the entries are displayed.
VLAN ID
VLAN-ID in which the ARP traffic is permitted.
MAC Address
User MAC address of the entry.
IP Address
User IP address of the entry.
