OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 128
LINK EVENT CONFIGURATION
Configuration
Link OAM
Event Settings
This page allows the user to inspect the current
and change them as well.
Port
The switch port number.
Event Name
Name of the Link Event which is being configured.
Error Window
Represents the window period in the order of 1 sec for the observation of various link events.
Error Threshold
Represents the threshold value for the window period for the appropriate Link event so as to
notify the peer of this error.
Error Frame Event
The Errored Frame Event counts the number of errored frames detected during the specified
period. The period is specified by a time interval ( Window in order of 1 sec). This event is
generated if the errored frame count is equal to or greater than the specified threshold for that
period (Period Threshold). Errored frames are frames that had transmission errors as detected
at the Media Access Control sublayer. Error Window for 'Error Frame Event' must be an
integer value between 1-60 and its default value is '1'. Whereas Error Threshold must be
between 0-4294967295 and its default value is '0'.
Symbol Period Error Event
The Errored Symbol Period Event counts the number of symbol errors that occurred during
the specified period. The period is specified by the number of symbols that can be received in
a time interval on the underlying physical layer. This event is generated if the symbol error
count is equal to or greater than the specified threshold for that period. Error Window for
'Symbol Period Error Event' must be an integer value between 1-60 and its default value is '1'.
Whereas Error Threshold must be between 0-4294967295 and its default value is '0'.
