OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 101
Configure the ACL parameters (ACE) of each switch port. These parameters will
affect frames received on a port unless the frame matches a specific ACE.
Port
The logical port for the settings contained in the same row.
Policy ID
Select the policy to apply to this port. The allowed values are
0
through
255
. The default
value is 0.
Action
Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is
"Permit".
Rate Limiter ID
Select which rate limiter to apply on this port. The allowed values are
Disabled
or the
values
1
through
16
. The default value is "Disabled".
EVC Policer
Select whether EVC policer is enabled or disabled. The default value is "Disabled". Note that
ACL rate limiter and EVC policer can not both be enabled.
EVC Policer ID
Select which EVC policer ID to apply on this port. The allowed values are
Disabled
or the
values
1
through
256
.
Port Redirect
Select which port frames are redirected on. The allowed values are
Disabled
or a specific
port number and it can't be set when action is permitted. The default value is "Disabled".
Mirror
Specify the mirror operation of this port. The allowed values are:
Enabled
: Frames received on the port are mirrored.
Disabled
: Frames received on the port are not mirrored.
The default value is "Disabled".
Logging
Specify the logging operation of this port. Notice that the logging message doesn't include the
4 bytes CRC. The allowed values are:
Enabled
: Frames received on the port are stored in the System Log.
Disabled
: Frames received on the port are not logged.
The default value is "Disabled". Note: The logging feature only works when the packet length
is less than 1518(without VLAN tags) and the System Log memory size and logging rate is
limited.
Shutdown
Specify the port shut down operation of this port. The allowed values are:
Enabled
: If a frame is received on the port, the port will be disabled.
Disabled
: Port shut down is disabled.
The default value is "Disabled".
Note: The shutdown feature only works when the packet length is less than 1518(without
VLAN tags).
