Optical Systems Design OSD2512 User Manual Download Page 295

Page: 295 / 401

OPTICAL SYSTEMS DESIGN

DOC ID: 10118101

OSD2512 OPERATOR MANUAL

PAGE 295

Rx and Tx Inform

The number of inform (option 53 with value 8) packets received and transmitted.

Rx and Tx Lease Query

The number of lease query (option 53 with value 10) packets received and transmitted.

Rx and Tx Lease Unassigned

The number of lease unassigned (option 53 with value 11) packets received and transmitted.

Rx and Tx Lease Unknown

The number of lease unknown (option 53 with value 12) packets received and transmitted.

Rx and Tx Lease Active

The number of lease active (option 53 with value 13) packets received and transmitted.

Rx Discarded checksum error

The number of discard packet that IP/UDP checksum is error.

Rx Discarded from Untrusted

The number of discarded packet that are coming from untrusted port.

Buttons

: The DHCP user select box determines which user is affected by

clicking the buttons.

: The port select box determines which port is affected by clicking the

buttons.

Auto-refresh

: Check this box to refresh the page automatically. Automatic refresh

occurs every 3 seconds.

: Click to refresh the page immediately

: Clears the counters for the selected port

Summary of Contents for OSD2512


















































































































































































































































































































































































































Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands

Optical Systems Design OSD2512, User Manual

Search results

Summary of Contents for OSD2512

Reviews:

Related manuals for OSD2512

Brands by name

Popular brands