OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 180
MAINTENANCE ENTITY POINT
Configuration
MEP
The Maintenance Entity Point instances are configured here.
Delete
This box is used to mark a MEP for deletion in next Save operation.
Instance
The ID of the MEP. Click on the ID of a MEP to enter the configuration page. The range is
from
1
through
100
.
Domain
Port:
This is a MEP in the Port Domain.
EVC:
This is a MEP in the EVC Domain. 'Flow Instance' is an EVC. The EVC must be
created
VLAN:
This is a MEP in the VLAN Domain. 'Flow Instance' is a VLAN. In case of Up-MEP
the VLAN must be created
Mode
MEP:
This is a Maintenance Entity End Point.
MIP:
This is a Maintenance Entity Intermediate Point.
Direction
Down:
This is a Down MEP - monitoring ingress OAM and traffic on 'Residence Port'.
Up:
This is a Up MEP - monitoring egress OAM and traffic on 'Residence Port'.
Residence Port
The port where MEP is monitoring - see 'Direction'. For a EVC MEP the port must be a port
in the EVC. For a VLAN MEP the port must be a VLAN member.
Level
The MEG level of this MEP.
