OPTICAL SYSTEMS DESIGN
DOC ID: 10118101
OSD2512 OPERATOR MANUAL
PAGE 8
1
PRODUCT DESCRIPTION
This manual describes how to install and setup the OSD2512 Managed Ethernet Switch. To get the
most out of this manual, the user should have an understanding of Ethernet networking concepts. This
manual is in two parts – A Quick Start Guide section and a detailed user manual format.
The OSD2512 is a managed 12-port 10/100/1000BASE-T RJ45 and 2-port 1G (SFP) Ethernet Switch
designed to operate in tough industrial applications providing real-time redundant performance. The
SFP modules are sold separately.
The unit will operate on either 1310nm and/or 1550nm singlemode. Standard operation over at least
10km of singlemode fiber is possible by use of the appropriate SFP optical devices. It normally
requires two fibers per SFP port but is optionally available for one fiber operation.
A major benefit of the OSD2512 is its reliable and consistent performance over the -25°C to +70°C
temperature range.
2
FUNCTIONAL DESCRIPTION
Managed L2 switch for small to medium-sized enterprise networks requiring high throughput
Redundant and self-healing network
Industrial IP communications for rugged environments
General
∆
L2 managed Ethernet switch
∆
ITU-TG.8032 Ethernet Ring Protection Switching
∆
CPU Memory 128MB
∆
User-friendly web browser based GUI
∆
CLI and SNMP management
Port Control
∆
Port speed, duplex mode, and flow control
∆
Port status -- link monitoring
∆
Port statistics -- MIB counters
∆
Port cable diagnostics
QoS
∆
Traffic classes (1, 2, or 4, 8 active priorities)
∆
Port default priority and user assigned priority
∆
Scheduler priority
∆
QoS control
∆
Storm control
L2 Switching
∆
IEEE 802.1D Bridge with auto MAC learning/aging
∆
IEEE 802.1Q static VLAN
∆
Private VLAN (static)
∆
44Gbps switching backplane
∆
IEEE 802.1Q-2005
–
Rapid spanning tree (RSTP)
∆
IEEE 802.3ad Link aggregation, static and LACP
∆
DHCP client
∆
Port mirroring
Security
∆
Port-based 802.1X
∆
Web and CLI authentication and authorization
