DMTA-10084-01EN, Rev. 2, November 2018
Chapter 7
84
Figure 7-10 Minimum depth alarm marker
To set a minimum depth alarm
1.
Activate the gate in the
Gate1
or
Gate2
dialog box (see “Navigating Dialog Boxes
and Setup Pages” on page 19 for details on using the dialog boxes.
2.
Use the
G(1
or
2) Start
,
Width
, or
Level
parameters to position the gate to cover
the desired area.
3.
Select
G(1
or
2) Alarm
, and then select the
Min Depth
alarm condition.
4.
Turn the adjustment knob to set the
Min Depth
value.
The minimum depth alarm value must be greater than the gate start value and
less than the gate width value.
The minimum depth alarm is not available when certain special functions are
enabled.
7.9.2.2
Minimum Depth Alarm with Gate Tracking
When gate tracking is active, the tracking gate moves side-to-side, tracking the
position of the echo in the nontracking (first) gate. With gate tracking active, the
Min
Depth
alarm threshold is relative to the position of the echo in the nontracking gate
(first gate).
Minimum depth alarm marker
NOTE
Summary of Contents for EPOCH 6LT
