manualshive.com logo in svg

Olympus EPOCH 6LT, User Interface Manual

Share
Download
Olympus EPOCH 6LT User Interface Manual Download Page 138

DMTA-10084-01EN, Rev. 2, November 2018

Chapter 9

  

128

The 

Backup|Restore

 setup page enables you to do the following:

•

Copy language support files to or from a USB flash drive

•

Copy DGS/AVG custom probe files to or from a USB flash drive

•

Copy XML schema files to or from a USB flash drive

•

Copy all database files to or from a USB flash drive

•

Copy the entire data logger content to or from a USB flash drive.

To use the Backup

|

Restore page

1.

Open the 

Backup|Restore 

setup page (see Figure 9-24 on page 128).

2.

Turn the adjustment knob to select an action.

Figure 9-24  Backup|Restore setup page

The available actions include the following:

— Copy language BIN file from USB mass storage

Imports a language file from the USB flash drive to the internal memory to 
update user interface translations.

Summary of Contents for EPOCH 6LT









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands