manualshive.com logo in svg

Olympus EPOCH 6LT, User Interface Manual

Share
Download
Olympus EPOCH 6LT User Interface Manual Download Page 114

DMTA-10084-01EN, Rev. 2, November 2018

Chapter 9

  

104

— Alarm conditions
— Gate measurement modes
— Sound path leg for each gate
— Up to five measurement reading box values (all active user-selected 

measurements on the instrument screen)

— A-scan waveform
— Peak memory envelope or peak hold waveform, if active
— Complete setup parameters
— Flag status (Freeze, Zoom, PeakMem, etc.)
— Active software features: DAC/TCG, DGS/AVG, AWS D1.1/D1.5
— Software feature/option setups

9.4

Data Logger Setup Pages

The available setup pages are as follows:

•

Create

Create different types of files.

•

File

View file data in multiple formats and with varying detail.

•

Manage

Edit certain file information, copy files, and delete files.

•

Import

Import files from a USB flash drive.

•

Export

Export files to a USB flash drive.

•

Memo

Create memos within existing files.

•

Video

Review recordings and export and import video files.

•

Backup/Restore

Back up and restore files.

The functionality of the 

File Management 

setup pages is explained in the following 

sections.

Summary of Contents for EPOCH 6LT









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands