Olympus EPOCH 6LT, User Interface Manual

Page: 117 / 232

DMTA-10084-01EN, Rev. 2, November 2018
Data Logger 107
b) Enter a Start ID for the INC file.
6. If the File Type is CAL , press the Tab key, and then enter a calibration ID.
7. After you have completed the file setup, press the Tab key to highlight the Create
button.
8. Press the Enter key to create the file and exit the setup page.
After a file is created, you must use the Manage setup page to open and edit the file.
See “Selecting a File as the Active Storage Location” on page 108 for instructions on
how to open a file.
9.4.2 File
The File setup page enables you to perform multiple actions for saved files:
• Select a file as the active storage location
• View details about a specific file
• View setup and waveform data for saved IDs in a file
• Recall a file ID to bring saved data to the live screen
• View a summary of all saved data in a file
• View memos
To select a file
1. On the Settings menu, select the File icon to open the File setup page (see
Figure 9-4 on page 108).
2. Turn the adjustment knob, and then press the Enter key to select the specific file
that you want to work with.
NOTE