DMTA-10084-01EN, Rev. 2, November 2018
Setup Pages
43
Figure 5-8 X-Axis Grid Mode options
•
Y-Axis Grid Mode
Sets the vertical y-axis grid display mode to 100 % or 110 % full-screen height.
•
Digital Video Output
Controls the output to the digital video connector.
Standard
grid: traditional flaw detector view with
10 divisions equally spaced across the screen range,
and the numbers 1–10 appearing below each division.
SoundPath
grid: actual sound path measurements at
equally spaced increments along the horizontal axis.
This mode displays 5 divisions, each labeled with its
corresponding sound path value (depending on the
Basic > Range
,
Basic > Delay
, and
Meas Setup >
Units
settings).
Leg
grid: vertical lines represent angle beam inspection
legs. This mode displays up to 4 divisions, labeled
L1
to
L4
, each representing the half-skip distance of a test
piece during an angle beam inspection. The spacing
and number of divisions displayed depends on the
Basic > Range
,
Basic > Delay
, and
Trig > Thick
(material thickness) parameters.
Summary of Contents for EPOCH 6LT
